GR 6KVA-10KVA
GR 6KVA-10KVA

GR series provides Rack/Tower form factor to fit diverse environment. Despite its compact footprint, this UPS incorporates internal battery packs which can be accessed via the front panel for maintenance.

Scudo 400VA/600VA Standby UPS
Scudo 400VA/600VA Standby UPS

o    True double-conversion online UPS

o    Output power factor 0.9

o    User-friendly and easy-shift LCD display

o    Rack/Tower design

o    Programmable power management outlets

o    50/60 Hz frequency converter mode

o    ECO and advanced ECO mode for energy saving

o    Emergency Power Off Function (EPO)

o    DSP technology applied for 6K and up models

o    Active input power factor correction 0.99 for 6K and up models

o    N+X parallel redundancy available for 6K and up models


Model

GR 6K

GR  10K

PHASE

Single  phase with ground

CAPACITY 

6000   VA / 5400 W

10000   VA / 9000 W

Input

Nominal Voltage

200/208/220/230/240   VAC

Voltage Range

176-300   VAC at 100% load ; 110-300 VAC at 50% load

Frequency Range

46~54   Hz or 56~64 Hz

Power Factor

≧ 0.99 @ 100% load

Output

Nominal Voltage  

200/208/220/230/240   VAC

200/208/220/230/240   VAC

AC Voltage Regulation

± 1%

± 1%

Frequency Range

(Synchronized Range)

46~54 Hz or 56~64 Hz

Frequency Range (Batt.Mode)

50   Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz

Current Crest Ratio

3:1   (max.)

Harmonic Distortion

≦ 2 % THD (Linear Load),
  ≦ 4 % THD (Non-linear Load)

≦ 2 % THD (Linear Load),
  ≦ 4 % THD (Non-linear Load)

Transfer   Time

Line mode to Battery mode

Zero

Battery mode to Line mode

Zero

Inverter to Bypass

Zero

Bypass to Inverter

Zero

Waveform (Batt. Mode)

Pure Sinewave

EFFICIENCY

Line Mode

90%

90%

Battery Mode

88%

88%

ECO Mode

96%

96%

BATTERY

Standard   Model

Nominal   Voltage

240 VDC

Battery   Type

12 V / 7 AH

12 V / 9 AH

Numbers

20 (18-20 pcs adjustable)*

20 (18-20 pcs adjustable)*

Typical Recharge Time

7 hours recover to 90% capacity

9 hours recover to 90% capacity

Charging Current (Max.)

1.0A

1.0A

Float Charging Voltage

273VDC (based on battery numbers at 20 pcs)

Long-run   Model

Battery Type and Numbers

Depending on applications

Charging Current (Max.)

4.0A

4.0A

Float Charging Voltage

273 VDC (based on battery numbers at 20 pcs)

Indicators

LCD Display

UPS   status, Load level, Battery level, Input/Output voltage, Discharge timer, and Fault conditions

Alarm

Battery Mode

Sounding every 4 seconds

Low Battery

Sounding every second

Overload

Sounding twice every second

Fault

Continously sounding

Physical

Standard   Model

 

Dimension,DxWxH(mm)

UPS unit: 580 x 438 x 133 [3U] Battery pack: 580 x 438 x133 [3U]

UPS unit: 668 x 438 x 133 [3U] Battery pack:580 x 438 x133 [3U]

Net Weight(kgs)

UPS unit: 20; Battery pack: 57

    UPS  unit: 23.5 ;   Battery pack: 63

Long-run   Model

Dimension,DxWxH(mm)

580 x 438 x 133

668  x 438 x 133

Net Weight (kgs)

20

23.5

Environment

Operation Humidity

0-95% RH @ 0- 40°C (Non-condensing)

Noise Level

Less than 58dBA @ 1 Meter

Less than 60dBA @ 1 Meter

Managerment

Smart RS-232/USB

Supports  Windows 2000/2003/XP/Vista/2008, Windows 7/8, Linux, Unix, and MAC

Optional SNMP

Power management from SNMP manager and web browser

 

*  When using internal batteries from 18-19, the unit will de-rate according to below   formula: P=PRating x N/20

 

*  If the UPS is installed or used in a place where the altitude is above than   1000m, the output power must be derated one percent per 100m.

 

*  L means long-run model

*  Product specifications are subject to change without further notice